CPCS Training (A59) - 360 Degree Excavator/Digger Course above 10 tonnes - Intermediate

To ensure you have a thorough understanding of the relevant operational and safety requirements applicable to 360 Excavator above or below 10 tonnes with lifting ops working in the construction industry and allied environments in accordance with CITB recommendations.

Upon successful completion of the course, an individual with a 360 excavator will be able to:
- Describe the nature of the sector of industry and their role and responsibilities as a plant operator.
- Name and explain the purpose of principle components, the basic construction, controls and terminology.
- Confirm with Manufacturer’s requirements as per the operator’s handbook, other types of information source and the relevant regulations and legislation.
- Undertake all pre-use checks.
- Configure and ready for travel (site and highway – where applicable).
- Travel over rough, undulating ground, steep inclines and level surfaces.
- Manoeuvre in confined spaces.
- Configure and set for excavating duties.
- Explain actions required for hazards, underground and overhead services.
- Excavate differing types of excavations in various types of ground.
- Grade, spread and level ground and materials.
- Place materials into transporting vehicles and hoppers.
- Attach and remove buckets.
- Lift, move and place basic slung loads.
- Carry out shut down and securing procedures.
- Explain the loading and unloading procedures for machine transporting.

Pre-Requisites

Delegates must have passed the Health, Safety and Environment test within the past 2 years before booking onto a CPCS Technical Test.

All visitors must report to reception on arrival at the time specified and follow site safety rules at all times.

Tea and Coffee are available free of charge, but there is no other catering facility on site, so delegates need to provide any further refreshments/meals they may need throughout the day.
Candidates must bring and wear their own 3 point PPE on site for plant testing. They must also bring signature and photographic identification as required for all testing.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

Training: The course is centred around the practical test and clients will be given maximum time training on the machine they will use in the test, from 8.30 am – 4 pm. Support will be given with the theory questions if needed, but we would anticipate clients will have revised for the theory prior to arriving at the centre. (Full details of both theory questions and practical test specs are available from CITB website.)

Test: You will be tested with a theory and practical test using CPCS standards. To attain the Red Card you must pass both the theory and practical tests.

The CPCS Theory test is recorded digitally by the tester to ensure adherence with CPCS Standards. The CPCS Practical test may be recorded using a Video recorder if the CPCS request it.

The Construction Plant Competence Scheme (CPCS) is recognised by the UK Contractors Group (UKCG) and Major Home Builders Group (MHBG) as the preferred card to comply with codes of practice for competence and certification. It was launched in 2003 to help them comply with regulations and requirements and aims to apply common standards for all plant operators.
CPCS is owned by the Construction Industry Training Board (otherwise known as CITB).

On successfully completing the test you will receive a Red CPCS Trained Operator card that is valid for 2 years.

During these 2 years you must work towards achieving your NVQ in Plant Operations to upgrade to a Blue CPCS Competence Card.